Description: The Happymodel Mobula 6 1S ELRS V3.0 65mm SE0702 26000KV RunCam Nano 800TVL Tiny Whoop is a top-of-the-line drone perfect for enthusiasts looking for high performance. With a brand name like Happymodel, you can trust in the quality and durability of this drone. Compatible with ELRS V3.0 and featuring a 65mm scale, this drone is sure to impress with its smooth and precise flying capabilities. Ideal for those interested in radio control hobbies, this drone is a must-have for anyone looking to take their flying skills to the next level. The Mobula 6 is equipped with SE0702 26000KV motors and a RunCam Nano 800TVL camera, providing excellent image quality and speed. Upgrade your drone collection with the Happymodel Mobula 6 and experience the thrill of flying like never before. -AI description. Description: ExpressLRS is currently the most popular remote control link system. It has the characteristics of low latency and high packet rate, and its link quality is very reliable. Newly released 2024 Mobula 6 equipped with the latest ExpressLRS V3.0 RC link system, the new Mobula 6 comes with new SE0702 KV26000 High Speed brushless motors, these are the lightest brushless motors worldwide. The New Mobula 6 is a competitive option for you in the Tiny Whoop Season. Brand: Happymodel Item Name: Mobula 6 ELRS V3.0 1S 65mm Brushless whoop drone BNF version Wheelbase: 65mm Size: 80mm*80mm*37mm Weight: 18.7g Voltage: 1S Specifications: Motor: SE0702 KV26000 Configuration: 9N12P Stator Diamter: 7mm Stator Length: 2mm Shaft Diameter: 1.0mm Motor Dimension(Dia. x Len): 9.5mm x 14mm Weight(g): 1.46g No.of Cells(Lipo): 1S only Propellers: HQprop: 31mmx2 Center Thickness: 5mm Prop Disk Diameter: 31mm Center Hole Inner diameter: 1.0mm Flight controller: ELRS F4 2G4 AIO flight controller built-in SPl ExpressLRSV3.0 2.4G receiver MCU: STM32F411CEU6 (100MHZ, 512K FLASH) Sensor: MPU-6000 (SPI connection) Board size: 28.5 x 28.5mm Power supply: 1S battery input (direct current 2.9V-4.35V) Built-in 5A (each) Blheli_S 4in1 ESC Dshot600 ready Built-in Betaflight OSD (SPI Control) Built-in 5.8G VTX Built-in ExpressLRS 2.4Ghz receiver Built-in 5V 1A BEC Built-in voltage detection Onboard 4in1 ESC: MCU upgraded to EFM8BB21 Power supply: 1S LiPo/LiPo HVCurrent: 5A continuous peak 6A (3 seconds) Support BLHeliSuite programmable Factory firmware: O_H_5_REV16_7.HEX Default protocol: DSHOT600 Onboard SPI ExpressLRS 2.4GHz Receiver Packet Rate option: 25Hz/50Hz/150Hz/250Hz/500Hz RF Frequency: 2.4GHz Antenna : SMD antenna Telemetry output Power: <12dBmReceiver protocol: SPI ExpressLRS Could bind with Happymodel ES24TX, ES24TX Lite, ES24TX Slim and DIY 2.4GHz ELRS TX module ExpressLRS version 1.0.0 or 1.0.1 both compatible Onboard Serial-based ELRS Receiver. Onboard Serial-based ELRS Receiver: Operation current: ~100Ma RX to FC protocol: CSRF Antenna connector: IPEX4 Telemetry output Power: < 17dBmFirmware target: Happymodel_RX_ES915RXReceiver protocol: CRSF Could bind with Happymodel ES915TX, Frsky R9M and DIY ELRS TX module (need to flash the same version ELRS firmware). Firmware flash via Betaflight pass-through Onboard 5.8g VTX: Output power: 25mw~200mw Frequency: 40CH Input voltage: 3.3V to 5.5V Current consumption: 300mA(type) Frequency: 5.8GHz 5bands 40 channels With Race bandSmartaudio ready Runcam Nano3: Model: RunCam Nano 3 Image Sensor: 1/3;a CMOS Horizontal Resolution: 800TVL Lens : 2.1mm(M8) FOV160;ã Signal System: PAL/NTSC Non Switchable S/N Ratio: >50dB Electronic Shutter Speed: Auto Auto Gain Control (AGC): Auto Min. Illumination: 0.01Lux@1.2F D-WDR: Auto Day/Night: Color Power:direct current 3-5.5V Current: 110mA@5V 120mA@3.3V Housing Material: ABS Net Weight: 1.2g Dimensions: L14mm*W14mm*H9mm Lipo Battery: Capacity:300mAh Voltage:3.8v Continuous Discharge Rate: 30C Size: 57mmx12mmx7mm/ Weight: 8g Connector: PH2.0 Package Includes: Mobula6 1S 65mm whoop Drone Frame (blue) 4x SE0702 KV26000 brushless motor 1x HQPROP 31mm bi-blade propellers(4cw+4ccw) 1x Runcam Nano3 1/3 CMOS 800TVL camera 1x Onboard 5.8G 25mw~200mw VTX 1x 1S Lipo/LIHV USB Charger 1x Propeller disassemble tool 1x ELRS V3.0 F4 2G4 flight controller built-in receiver 4x TATTU 300mAh 75/150C Lipo *Feel free to send a message if you have any questions. **Freight varies to some international destinations.
Price: 198.95 AUD
Location: Brisbane
End Time: 2025-01-02T03:23:17.000Z
Shipping Cost: 14.96 AUD
Product Images
Item Specifics
Restocking fee: No
Return shipping will be paid by: Buyer
Returns Accepted: Returns Accepted
Item must be returned within: 30 Days
Compatible Brand: ELRS V3.0
Brand: Happymodel
Type: Whoop
MPN: Does Not Apply
Compatible Scale: 65mm
