Description: FEATURES: AIO 4IN1 Crazybee F4 Lite flight controller built-in 5.8G VTX Extreme light 1S 65mm Brushless whoop only 20g Runcam Nano3 The lightest 1/3 CMOS 800TVL Camera Smooth and powerful Compatible for 1S Lipo/LIHV Camera Angle adjustable Specifications: Brand Name: Happymodel Item Name: Mobula6 1S 65mm Brushless whoop drone BF version Wheelbase: 65mm Size: 80mm*80mm*37mm Net weight: 20g(without battery) Takeoff weight: 28g Receiver option: Internal SPI Frsky version (Compatible with ACCST D8/D16, Recommend D8 mode) Internal SPI Flysky version (Compatible with AFHDS and AFHDS-2A Flysky transmitter) Motor speed option: SE0802 KV25000(Race Edition) SE0802 KV19000(Regular Edition) Package includes: Item NameQty Mobula6 1S 65mm whoop Drone Frame1 SPI Receiver Option1: Crazybee F4 Lite FC built-in Frsky SPI D8 RX1 SPI Receiver Option2: Crazybee F4 Lite FC built-in Flysky SPIRX SE0802 KV19000 or KV25000 brushless motor. Gemfan 1219-3 Propellers (4c+4ccw). Runcam Nano3 1/3 CMOS 800TVL camera. 5.8G 25mw 40ch vt (Flight controller built-in). 1S 300mah 30C LiHV Battery. 1S Lipo/LIHV USB Charger1 Propeller disassemble tool SPECIFICATIONS: Motors: SE0802 25000KV Configuration: 9N12P Stator Diameter: 8mm Stator Length: 2mm Shaft Diameter: Ф1mm Motor Dimension (Dia. x Len): Ф10.5mm*14.9mm Weight(g): 1.9g No.of Cells (Lipo): 1S only Propellers: Gemfan 1219-3 Center Thickness: 5mm Prop Disk Diameter: 31mm Center Hole Inner diameter: 1.0mm Weight: 0.28g CrazybeeF4 Lite v2 (Frsky version) CRAZYBEE F4 Lite Frsky version Firmware target: CrazybeeF4FR (Flysky SPI RX version) CRAZYBEE F4 Lite Flysky version Firmware target: CrazybeeF4FS Sensor: ICM20689(SP| connection) Board size: 28.5 * 28.5MM Power supply: 1S battery input (DC 2.9V-4.35V) Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready Built-in Betaflight OSD(SPI Control) Built-in 5.8G VTX Built-in SPI Frsky/Flysky receiver Built-in 5V 1A BEC Built-in voltage detection Onboard 4in1 ESCMCU Power supply: 1S LiPo/LiPo HVCurrent: 5A continuous peak 6A (3 seconds) Support BLHeliSuite programmable Frsky/Flysky version Factory firmware: O_H_5_REV16_7.HEX Default protocol: DSHOT600 Onboard Frsky SPI D8 receiver VersionSPI BUS receiver Frsky D8 compatible Compatible Non EU transmitter D8 modelChannels: 8ch Failsafe support No ground interference ( Transmitter and receiver 1 m from the ground): 100m~200m Onboard Flysky SPI receiver VersionSPI BUS receiver Protocol: AFHDS and AFHDS-2A Switchable Channels: 8ch(AFHDS) or 14ch(AFHDS-2A) No ground interference ( Transmitter and receiver 1 m from the ground): 100~200m Failsafe support Onboard 5.8g VTX (Openvt) Output power: Omw~400mw Frequency: 48CH Input voltage: 3.3V~5.5V Current consumption: 300mA(type) Frequency: 5.8GHz 5bands 48 channels With Race band Smartaudio ready Runcam Nano3Model: RunCam Nano 3 Image Sensor: 1/3" CMOS Horizontal Resolution: 800TVL Lens : 2.3mm (M6.5) FOV 140° Signal System: NTSC S/N Ratio: > 50dBElectronic Shutter Speed: Auto Auto Gain Control (AGC): Auto Min. Illumination: 0.01Lux@1.2F D-WDR: Auto Day/Night: Color Power:DC 3-5.5V Current: 110mA@5V 120mA@3.3V Housing Material: ABS Net Weight: 1.2g Dimensions: L14mm*W14mm*H9mm Lipo BatteryCapacity:300mAh Voltage:3.8v Continuous Discharge Rate: 30C Size: 57mmx12mmx7mm Weight: 8gConnector: PH2.0 Package Includes: 1x Mobula 6 v2 4x HV 3.8v 300mah LiPo 4x props (2x CW, 2x CCW) 1x tool kit 1x 1ch 1s charger **please send a message if you have any questions.
Price: 198.95 AUD
Location: Brisbane
End Time: 2024-08-02T01:23:17.000Z
Shipping Cost: 2.68 AUD
Product Images
Item Specifics
Restocking fee: No
Return shipping will be paid by: Buyer
Returns Accepted: Returns Accepted
Item must be returned within: 30 Days
Compatible Brand: For FlySky
Brand: Happymodel
Type: Whoop
MPN: Does Not Apply
Compatible Scale: 65mm
